1.Resource domain. User Domain. You want to use the NT Accounts from User - who needs to trust whom?

2.Exchange/Unix/Internet - Can sent to Internet using relay host. What must be done so you can use both? (both unix and inet)?

3.RPC binding order...where do you change? In the Registry under HKEY_LOCAL_MACHINE \Software \Microsoft \Exchange \Exchange Provider

4.Distribution list sends - and when the recipient looks at the message - no users are listed.. why?

5.Exchange server in Sales, HR, Finance, and 2 in Field...HR and Field have 2-way trust. HR also trusts IS. Sales trusts HR and IS. Field Trusts only HR. Finance trusts Field and HR. IS trusts no one. Where should the Site Services account be placed?

6.Hard drive is thrashing. I/O is at 70%. HD space shows 60% left. Page file is at 5...what do you need to do to improve performance?

7.HR distribution list needs to see hidden public folders. How do you make them visible?

8.User sent an email to someone@abc.com it is returned with an NDR of Invalid address...what is wrong?

9.High packet loss...unreliable connection...what should you use as connector, and what variables would you want to change?

10.You want to move mailboxes from one server to another in the same site...how do you do it? 1) select the mailbox in the content pane, click on Tools, then on move mailbox, specify to which server OR

2) use the Advanced property page & change the Home Server field in the mailbox itself

11.Company XYZ uses uuencode for messaging, but all other clients user mime...where/how do you configure for this? In IMS.

12.Had 4.0 environment, upgraded to 5.0 - pop3 doesnt work now, why?

13.You are using the WWW and want to check the WWW service...what do you run?

IIS performance monitor

14.Exchange receives all incoming mail for all users who have not migrated yet...you want mail to pass to old and new folks without causing any problems or ndrs...how do ya do it?

15.DEC All-in-1 migration steps.

16.How can you connect to the Admin.exe program (to a specific server) - by ip, host, mac address...etc? Can be used to administer any site that support an RPC connection. These include: Local RPC, TCP/IP, SPX, NetBIOS, SPX, Vines IP.

17.Unix migration to exchange. Both use SMTP relay host on unix box. Want to be able to allow Unix users to still get old SMTP mail when migrated...how do you handle this?

In user’s mailbox in Admin program (properties page) click on e-mail address tab and add new (or old) SMTP address.
 

18.How do you change a public folder owner after the original owner has been deleted?

Copy backup to another PC then copy the folder back into the original server and then change the owner.

19.How do you stop x.400 addresses from being generated for new users?

E-mail address tab – deselect it.

20.Can't start Admin.exe...what is wrong?

Any user can run Admin.exe from any Windows NT based computer and can administer any site to which they can establish and RPC connection PROVIDED they have been granted permission to administer that site.

21.Export lotus accounts. You want to import all but x.400 addresses, how do you do this?

22.London, Hong Kong, US, replication. What utility can you use to sync up times on Exchange servers?

23.How to set size limits on incoming and outgoing mail without affecting intrasite limits?

24.Pop3 client authentication options...know what they are and ports they use.

25.What is an address book view? And how many can a remote client have active at a time

26.What steps are needed to migrate Lotus users to Exchange?

27.How do you initiate DirSync on a MsMail PO? (manually)

28.POP3 clients can send, but not retrieve over internet....why?

29.Only some of your inbox is visible when using the web client, why?

30.What connectors can have tracking set up on them?

31.Your UNIX box has accounts stored in an SQL database, how can you allow those to be included in your address book. Use Import, then Export into Exchange.
 

32.You receive e-mail with attachments that have .att extension. When you attempt to open them they are garbled. What do you do to fix this?

Set MIME on incoming mail in IMS NOT in Protocol.

33.Which mailbox permissions are available to only users or only admins?

34.What are isinteg and edbutil, and when are they to be used?

35.What do you run after an offline backup?

36.What effect does filtering a tcp port have on Exchange?

37.What effect on addresses does moving mailboxes between sites have?

38.When should you use a DNS relay agent?

39.You have 2 servers: 1 MS Mail and 1 MS Exchange. After setting up the connectors, how do you set up a distribution list containing all users from both sites?
a. set up directory synchronization
b. create a distribution list in Exchange containing all users from both sites
c. create a distribution list in MS Mail containing all users from both sites
d. create a distribution list in Exchange containing Exchange users create a distribution list in MS Mail containing all Mail users create a distribution list in Exchange containing the 2 distribution list

40.They go though you with a pipe cleaner in regard to POP3, HTTP & MS Mail connectivity. You have to know this from the client end and how to restrict access on the server. You should also know which ports exchange requires to send and recieve mail (for POP3, SMTP etc). You really have to have this NAILED DOWN before even attempting it.

41.You want to use Migration Wizard to create Exchange mailboxes from Lotus CC:mail accounts. You have extracted them to a .CSV file but it also created addresses for MS Mail and X.400. You only need Internet addresses. How do you prevent this from happening so that only SMTP addresses are created?
a. do not put anything in the mode section of the CSV file
b. add blanks for X.400 and MSMail addresses
c. disable X.400 and MSMAIL from Site addressing

42.How do you prevent SMTP addresses from replicating to another Exchange Site?
Configure it as LOCAL.

43. Information Store services have stopped because hard disk space have been
used up. How do you prevent it from happening again?
a. configure Performance Monitor to email you if low hard disk space.
b. configure Exchange Service Monitor to email you if low hard disk space.
c. configure Exchange Service Monitor to email you before stopping IS Services.
d. configure Performance Monitor to email you before stopping IS Services.

44. You have 2 Exchange 4.0 Servers. When you upgraded one server to 5.0 POP3 stops from functioning. What is the most probable cause?
a. public folders in 5.0 has not been properly configured
b. Exchange 4.0 and Exchange 5.0 are incompatible and cannot coexist in the same organization
c. You have to configure POP3 in the Exchange 5.0 server before it will work.

45. Kay, In New Orleans runs Schedule+ 7.0 to book a meeting. He wants to include several other users for this meeting, one of which is on the MS Mail server. However, the user does not appear on his planner. Why is thisoccuring?

46. You have 2 computers, both running Windows 95. The first, a workstation at your office, is connected to your company's local area network. The second is a laptop you take on the road. You want to be able to read your Exchange mail when traveling, but you also want to keep a copy of your mailon the Exchange server back at the office. How can you do this?
a. download messages to a .PST file using remote mail
b. synchronize an .OST file on the server with the local .OST file
c. synchronize the local .PST file with an .OST file on the server
d. Exchange mail cannot be downloaded locally and stored centrally.

47. Manually move Peter’s and David’s mailboxes from site1 to site2. When Peter tries to reply to David’s message he received NDR. When David uses reply to Peter’s message he gets the same result. Why?

Reply to addresses don’t exist anymore. Use GAL to send to new address.

48. Communication failure error when trying to connect to exchange server via admin program - what's the problem?

49.Exchange/ms mail setup dir sync but after a couple of hours hasn't worked - what do you do?

50. LDAP client configured for anonymous access, but cannot - why?

51.How do you move mailbox to a different server within your site, can't use move mailbox tool, answers about specifying
home server, on either the exchange server or client?

Change the home server in the client mailbox? Or something like that.

52. You must set up 2 exchange servers, each in a separate site. You must allow each administrator to only administer their own site but directory should be replicated between sites. How do you do this?
a. set trust relationships between the 2 sites use same Exchange service accounts for both sites
b. set trust relationships between the 2 sites use different Exchange service accounts for both sites
c. do not set trust relationships between the 2 sites use same Exchange service accounts for both sites
d. do not set trust relationships between the 2 sites use different Exchange service accounts for both sites.

53. Your OST is corrupted. How do you fix it?
a. use Scanpst
b. rename mailbox.OST to mailbox.PST then run Scanpst

54. You have configured your Exchange server as a directory synchronization server. What else must you do to establish directory synchronization with MS Mail?
a. add another directory synchronization server
b. configure MS Mail
c. configure Exchange server to be directory synchronization requestor

55. You have 2 Exchange 4.0 Servers. You upgraded one to 5.0 without changing the Exchange service account. Directory replication suddenly stopped from functioning. Why?
a. logon as service is not given to the Exchange 4.0 service account
b. Exchange service accounts are not compatible with Exchange 5.0
c. invalid password

56. Susan does not want to download messages if they are larger than 20K. She does not want to examine he size of her messages before downloading them. What solution can you recommend?
a. use the advance filter dialog box of remote mail under the tools menu.
b. use the delivery tab options under the tools menu
c. use the general tab of the Inbox properties box
d. she can not do this

57. What connector do you use for unreliable connections between sites?
a. X.400 connector
b. Site connector
c. Internet Mail Connector
d. Directory synchronization connector

58. What connector do you want to optimize connection between exchange server sites?
a. X. 400 connector
b. Site Connector
c. Internet Mail Connector
d. Directory Synchronization Connector

59. You want to provide added reliability on Exchange Servers. What do you do? You have 2 hard disks, 1 is faster than the other.
a. install IS on the faster hard disk, install logs on the slower hard disk
b. install IS on the slower hard disk, install logs on the faster hard disk
c. install both the IS and the logs on the faster hard disk
d. install both the IS and the logs on the slower hard disk

60. You have just connected MS Mail to Exchange. One of the Exchange distribution list does not work. You found out that this distribution list contains a distribution list in MS Mail which works. What is the most probable cause of this problem?
a. the Exchange distribution list contains invalid email addresses
b. directory synchronization has not yet finished
c. the MS Mail distribution list contains invalid email addresses

61. You have 25 client access licenses. You have just added 10 new users who exclusively access the server remotely. 5 of the users through HTTP, the other 5 through POP clients. How many additional Client Access License do you need to purchase?
a. 0
b. 2
c. 5
d. 10

62. Kay, In New Orleans runs Scheduly+ 7.0 to book a meeting. He wants to include several other users for this meeting, one of which is on the MS Mail server. However, the user does not appear on his planner. Why is this occuring?
a. booking is not supported between MS Mail and Exchange
b. Set up the Schedule+ Free/Busy Connector

63. Which configuration offers the most data recovery in case of failure?
a. circular logging disabled, Exchange installed in Primary Domain Controller
b. circular logging disabled, Exchange installed in Non-domain controller
c. circular logging enabled, Exchange installed in Primary Domain Controller
d. circular logging enabled, Exchange installed in Non-domain Controller

64. You administer a site in which both MS Mail 3.2 and Exchange coexist. Having installed the Internet Mail Connector on the Exchange server, you want to provide the Mail 3.2 users access to the Internet through Exchange. How do you configure the gateway?
a. with Exchange SMTP Gateway Access on the Exchange postoffice
b. with Exchange SMTP Gateway Access on the MS Mail postoffice
c. with MS Mail SMTP Gateway Access on the Exchange postoffice
d. with MS Mail SMTP Gateway Access on the MS Mail postoffice

65. You have just set up a Key Management Server without creating the startup disk. When you rebooted, an error message appears stating "MS Exchange KM service returned service specific error 1". What is causing this?
a. missing startup disk
b. services not shut down properly

c. an incorrect startup parameter is declared.

Without the startup disk you need to go to Control Panel – services – select MS Exchange Key Manager. At the bottom of the page enter the security password in the "Startup Parameters" section, then click Start. Your KM service will then start properly.

66. You want to add another server to an existing site. What do you need to provide(2 answers)?
a. name of the existing server in the site
b. service account password
c. site name

67. How do you reduce network bandwidth during peak hours?
a. create replicas of public folders
b. distribute public folders between servers

68. You are creating installation scripts. How do you prevent clients (importing 1000 users) from using TCP/IP.
a. install clients, then manually configure each user to disable TCP/IP.
b. disable TCP/IP from site addressing
c. remove TCP/IP from the RPC binding order in the script

69. You want to give send as delegate access to another user. How do you do this?
a. not possible. Only administrator can do this
b. through exchange client

70. You can not send an Internet mail but PING works. How do you fix the problem?
a. install DNS server on the server
b. create HOSTS file for each client
c. install DHCP server
d. install WINS

71.Bunch of 4.0 servers configured into two sites. Basically one bridgehead server is upgraded to 5.0, and replication stops. upgrade other bridgehead to 5.0, replication is not compatible between 4 and 5

72.You have a slow connection. How can you improve reliability?(Choose 2)
a)decrease the MTA checkpoint
b)increase the MTA message threshold
c)x.400 connector
d)site connector increase the threshold

73.You want several engineers to all read and send mail from the same mailbox.
a)Set them all as owner
b)put them in a Distribution List and set the
box as owner of the list
c)Give all send as permission on mail box
d)...

74.You need to route mail through 3 different SMTP relays from one server.
a)Configure one IMS to send to three relays
b)Configure three IMS with one relay each.
c)Configure DNS to route.
d)...

75.One user uses Schedule+ to schedule a meeting, but her counterpart on MS MAIL does not show up as confirming. How can you configure so it works?
a)
b)Configure Schedule+ Free/Busy Connector
c)
d)Move the MS Mail Post office onto the Exchange Server

76.You are migrating Unix users to Exchange. It takes a while, you want people who are already migrated to get their mail, and you want the non-migrated to get their mail.
a)Put a .forward file on the Unix machine
b)Configure the DNS to do it
c)Have the users place a rule to forward
back to their previous address
d)...

77.You have a desktop and laptop computer. The Laptop keeps an .ost file. The server crashes and the backup fails. What will provide the most data recovery?
a)Copy .pst to server
b) create a .pst file on server, copy .ost to .pst resychronize
c)rename the .ost to .pst
d)Copy the .ost to the server and sync

78.Your server is running slow. Performance monitor shows:
CPU 60%
Page/sec 40
%disk avail 60
Disk transfer .02

a)ADD MORE RAM!
b)faster CPU
c)faster drive
d)bigger drive etc...
its always RAM, and I think the numbers show that out

79.You want to configure a client profile for a network share of an Exchange client installation. You should use:
a)On the client machine template.prf
b)On the network share template.prf
c)On the client machine default.prf
d)On the network share default.prf
Not specified specifically for 5.0, but in 4.0, the setup editor takes your template.prf and spits out a default.prf you can place in the network share. (d)

80.You want to configure a public folder for Usenet groups. Your Newsfeed provide will not custom configure the feed. What is the best way?
a)Pull
b)Push
c)?
d)?
Pull the feed, you can configure yourself

81. You have a groupwise email system in addition to the Exchange.You want users to be able to send messages between systems.
a)Install IMS
b)Import users
c)Configure Custom recipients for the Groupwise users.
d)Set up replication
just need custom recipients

82.You convert some MS Mail users to Exchange. MS Mail had capability to Email with Internet through an SMTP Gateway. You want to move Internet connection to Exchange. So you remove the MS Mail SMTP Gateway and install/configure Exchange Internet Mail Service and the MS Mail Connector. What else must you do to provide Internet mail to the users remaining on MS Mail?

83.You have a foreign email system, UNIX, with Directory in SQL database. You have Exchange. What to do to get those users in Exchange directory?
a. Enter all in Exchange from Administration program.
b. Extract from SQL to .csv file. Edit and import into Exchange.
c. Configure directory replication.

84.You get an exhibit with a bunch (5+) domains, showing their trust relations, and the placement of 3 or so exchange servers. You must choose which domain the exservice account should be placed. Looked at the placement of the three servers and the domains they are in. Choose the domain which all exchange domains trust.Nothing else is important.

85.Your company is migrating from MS Mail to Exchange. You complete the first step of two using the Migration Wizard. You want to modify the existing naming conventions during the second step. Which file must you modify?
a)the Packing list
b)Primary Migration file
c)Secondary Migration file
d)Migration Wizard log file.

86.You are migrating users. They show you a few lines of the migration file. The only address specified in the file is SMTP. Yet x.400 etc. addresses are being generated. How can you stop it.
a)Put blank Spaces in the migration file for unwanted addresses.
b)uncheck unwanted addresses in site addressing

87.You are using an x.400 connector to connect to a foreign x.400 system that only supports 8 bit names. How can you make the two work together?
a)Change Window Size to 8 bit.
b)something else weird to 8 bit
c)rename the connector to conform
d)

88.You have blocked outside access to exchange via POP3, LDAP, etc. from certain IP addresses. HTTP can still get through, and you want to block that as well. (just for certain IPs, not altogether) This is a job for the Internet Information Server, Exchange can block out the other protocols, but HTTP belongs to IIS.

89.POP3 - multiple Exchange 4.0 servers in site. Upgrade 1 to exchange 5.0. 5.0 uses cannot connect to server via POP3 client

90.KM service did not start, why.

KM Startup disk was not in the drive.

91.OST is damaged how to repair

92.Exchange/DNS integration

93.POP3 clients can retrieve mail but cannot send mail over internet - why?

94.Manually move mailboxes from site1 to site2. User cannot use reply to reply to messages they received before the move, but can send them e-mail - why? What effect on addresses does moving mailboxes between sites have.

95.Communication failure error when trying to connect to exchange server via admin program - what's the problem?

96.How can you set up a hierarchy of some 35 Public Folders and hide some folders from certain users and still allow others access.

97.You are running Schedule+7 on windows exchange client. You can see all schedules when using the planner tab except for MS-Mail users using schedule+1. What can the administrator do to Fix this?

98.Your network is setup with three Ms-mail servers with gateway services to the Internet. You have installed an exchange server and want to have it be the new gateway. What must you do on the Ms-Mail post office?

99.You have two domains A and B. There is no trust relationship between them. How can you administrator A or B without a trust relationship setup?

100.How can you change your E-mail address from John@RGB.Coffee.COM to John@RGB.COM?

101.You are migrating Ms-Mail users over to exchange. You have already edited the .cvs file. What best describes the second step?

102.When you synchronize your .ost file which folders are synchronized in exchange client?

103.You are installing exchange server on 5 servers A#, B#, C#, D# and E# you install exchange server on B# first, where would you put the server service account ?

You would put the service account on B.

T1
T1
256K

105.How can you make Word 7.0 your E-mail editor?

106.Why would your in-box Assistant be grayed out in Exchange client?

107.You want to send mail using Joe@RGB.COM. What address is valid?

SMTP 
SMTP @ RGB.COM.
SMTP JOE@RGB.COM.

108.You want your site to allow outbound mail to the Internet but not inbound what is the best way to set it up?

109. How can you change your exchange server name?

110.You set up the Internet mail connector but can't send mail, although you can ping the server. What is wrong?

111. You have a Novell network set up with MS Windows 3.11 clients. You install a MS exchange server, you want to migrate them over to exchange. What must you do?

112. How do you allow dialup connections for 3.11 users?

113. You have two sites, Accounting and management. There are public folders on both sides.They are being accessed from both sites, your network is being bottle necked how would you remedy this problem?

114 Bill has a local PST which is configured as the default delivery point. Bill has rules defined as follows:
1. If mail is received from JohnDoe, delete it.
2. If mail is received addressed to "Junk Alias" move it to Folder "Later" in local PST.
3. If mail is received with "Bill" in the Message Body, move it to Folder "BackItUp" on the
Microsoft Exchange Server.

115. If mail is received From Joyce addressed directly to Bill Reply with "I'm working on it."
What happens if JohnDoe send a message to the Junk Alias (assuming that I am the Junk Alias)?

116.Bill has local PST which is configured as the default delivery point. Bill has rules defined as follows:
1. If mail is received from JohnDoe, delete it.
2. If mail is received addressed to "Junk Alias" move it to Folder "Later" in local PST.
3. If mail is received with "Bill" in the Message Body, move it to Folder "BackItUp" on the
Microsoft Exchange Server.
4. If mail is received From Joyce addressed directly to Bill Reply with "I'm working on it."

117.What happens if Joyce sends mail to the Junk Alias (assuming that I am on the Junk Alias)?

118. Bill has local PST which is as configured as the default delivery point. Bill has rules as follows:
1. If mail is received from JohnDoe, delete it.
2. If mail is received addressed to "Junk Alias" move it to Folder "Later" in local PST.
3. If mail is received with "Bill" in the Message Body, move it to Folder "BackItUp" on the
Microsoft Exchange Server.
4. If mail is received From Joyce addressed directly to Bill Reply with "I'm working on it."

119.What happens if Joyce sends mail to the Junk Alias (assuming that I am on the Junk Alias) with "Bill" in the message body?

120.Bill has local PST which is as configured as the default delivery point. Bill has rules as follows:
1. If mail is received from JohnDoe, delete it.
2. If mail is received addressed to "Junk Alias" move it to Folder "Later" in local PST.
3. If mail is received with "Bill" in the Message Body, move it to Folder "BackItUp" on the
Microsoft Exchange Server.
4. If mail is received From Joyce addressed directly to Bill Reply with "I'm working on it."What happens if I receive 20 messages addressed to "Junk Alias" while my computer is online?

121.You setup an .ost file for offline storage. How do you Sync it with the server?

122.You have installed MS-Mail connector. You want to check how mail is being transported with Performance Monitor. What counters do you use?

123.You have two server's in a site, Mktg and Acctg. Mktg should be allowed to add users to the Accounting server but should bot be able to modify permission. What rights should be assigned to the User?

124.You want to configure Server Monitor to send e-mail if directory services fails. How do set this up?

125.You install Exchange and MS-Mail. Ms-Mail user send mails to Exchange. Message do not arrive?

126. You migrated .MMF to Exchange. MMF migration fails. Why?

127.Exchange Administrator wants to administrator another server remotely. Pinging the IP address works but he cannot connect to the server. Why?

128.You want to make the name of Public Folder appear in the Global Address List.What do you do?

129. ABC corp has one site spanning 3 locations (Berlyn, NY, Paris)
Required Results: Use the least number of administrators to provide Full time Support for the site.
Optional Results: Monitor Sites from Single Site. Install Fewest versions of Administrator program.
Proposed Solution: Install 3 Versions of Admin in NY. Create 3 8-hour shifts of Administrators

130. ABC corp has one site spanning 3 locations (Berlyn, NY, Paris)
Required Results: Use the least number of administrators to provide Full time Support for the site.
Optional Results: Monitor Sites from Single Site. Install Fewest versions of Administrator program.
Proposed Solution: Install 1 Version of Admin with all three languages in NY. Create 3 8-hour shifts for three administrators.

131. ABC corp has one site spanning 3 locations (Berlyn, NY, Paris)
Required Results: Use the least number of administrators to provide Full time Support for the site.
Optional Results: Monitor Sites from Single Site. Install Fewest versions of Administrator program.
Proposed Solution: Install 1 Version of Admin with one language in New York
And create 3 8-hour shifts for three administrators

132. The company has 50 sales people.
Required Results: Have a single e-mail address to receive mail from all sales people.
Optional Results: Copy the e-mail address to public folder and send a copy to all sales people.
Proposed Solution: Create a mailbox with an Internet e-mail address of Sales@Company .com.
Create rule to forward the mail to distribution list that has every sales person's mailbox address.
Ans: Required and 1 optional condition is met.

133. You have a Novell NetWare 3.x environment with 3.11 clients. You have just installed Microsoft Exchange Server and wish to migrate the users over using the migration wizard. What else must you install before you can use the migration wizard?

134.When you want to extract the user account list from NetWare to Exchange, you'll need to set the Gateway Service for NetWare (GSNW) on the server. On the Novell server side, you must have a NetWare 3.x or 4.x server running bindery emulation (NDS is not supported). You also need a NetWare account and password that has supervisor rights to the server.
This account will be used by Microsoft .

135.You have created some Top-Level folders for your Organization and want to let certain people see the contents of the folders, how can you set this up?

136.You are running a network shared installation for a Win 95 computer. What type of installation are you running? Look at display.

137.You have installed the Exchange Administrator program on an NT 3.51 Workstation and when you try to connect to the server you get an error like the display. What's wrong?

138. How can you keep certain user's from creating top-level PFs?

139. How can a user move there personal information store (.pst file) to a Network Server?

140. I cannot receive or send mail and my Outbox is red.

141. I want to have a different SMTP address. For inside my organization, I want to use "user@host", and for outside my organization, I want to use "user@company.com". How can I set this up?

142. I keep getting an error when I send mail that says: "No route to intended recipient." What does this mean?

143. How can you configure Public Folders for Offline use?

144.You are migrating 500 users to MS Exchange. 70 % of directory information is same. Name / Aliases are in .csv file. You want to include this information in a readily available format for Ms Exchange. What do you do ?

145.How do you add additional attributes for each user to address book ?
Ans. : Change the name of custom attributes in the Custom Attributes page of the DS Site Configuration Object. You have a choice of upto Ten Custom Attributes.

146.What can you do you in case a storage limit for public folder has been reached ?
Ans. : In the administrator window, choose public folder. Double click on the public folder you wish to configure. Choose the advanced tab. You can set a limit for the specific folder and issue a warning. When the public folder exceeds the storage limit, a warning message is sent to the public folder.

147.After migration from MS-Mail to Exchange, you want users to be able to reply to their messages ?
Ans. : For replies to work, all names must be defined as custom recipients in the global address list representing users from external mail systems. Any mail moved from the existing system has the sender's and recipient's display name in it.

148. Migrating from Ms Mail to Exchange. During Co-existence everyone get distribution list. What do you do ?
Ans.: Create Custom Recipients.

149.The Information store is used by 5 users. Each user has 5 messages stored. Each user sends 1st message to all users via local distribution list. 2-4 were sent individually to each user. 5th via Internet. How many messages are on the Information Store ?
Ans. : 21. : When a message is sent to a distribution list, each member of the distribution list get a separate notification, however only one copy of the message exists. Member of the distribution list share the copy.

150.You have 4 locations with 2 Exchange Servers in each location linked by 128 K lines. There is a public folder 600 MB is size and is accessed every 15 mins and is updated twice a week. Where should the replicas be placed.
Ans. : Since the data is accessed quite frequently, updated only twice a week and the bandwidth is low, put a copy (Repica) of the public folder in each site. However, you need to have it on only one of the Exchange servers in each site and not of both the servers.

151.You want Server Monitor to check critical Servers every 3 minutes and normal servers every 20 minutes. How can you do this ?
Ans. : In the Exchange administrator program, Select Monitors. In the Server Monitor properties dialog box select the General Tab. Change Polling Interval for Normal to 20 minutes and Critical Sites to 3 Minutes. The default for Normal Sites is 15 minutes and Critical sites is 5 Minutes.

152.Your company's Internet Messages to XYZ Corp arrives as Garbled text. XYZ Mail server supports UUEncoded attachments. Messages to other Internet Recipients are readable. You want the messages to XYZ to be readable, but you don't want to affect the messages to others. What should you do ?
Ans. : In the IMC properties select the Internet Mail tab. Select e-mail Domain button. Select Add button. Add the XYZ domain name to e-mail domain and select UUENCODE option for send attachments Using.

153.How can you assign permissions to a group of users to manage a distribution list ?
Ans. : You can grant another person permissions for a mailbox, a distribution list, a custom recipient, or a folder. You can designate more than one person to have permission on the recipients in case the primary administrator is out of the office. Assigning permissions at the site level is more global way to assign permissions and is recommended. Permissions at the recipient level override site permissions. Permissions that are set at the site level do not affect objects inside the configuration container, because you set the permissions for that container
separately. In the administrator window, choose distribution list. Select the permission tab for the recipient you want to configure. Under Windows NT account with permission box, choose add. In the list names From Box, select the Windows NT domain you want. In the Names Box, select user or group and choose add.

154.Create 4 recipients in Container A. You create another container B and want two of the users to be in the new container. How do you move the users from one container to another ?
Ans. : Move the users to another server in the site using the tools menu, Move user and move them back into Container B.

155.You have three locations Tokyo, Frankfurt and New York. The three locations are connected by 128K lines. What is the minimum number of Exchange sites you can have ?
Ans. : 1

156.You have Three locations LA, Chicago and Atlanta. LA and Chicago are connected by a T1 line. The connection between LA and Atlanta and Chicago and Atlanta is 14.4 kbps. What is the minimum number of Exchange sites you can have ?
Ans. : 2

157. Why will some Inbox Rules not fire on BCC d Mail?
Ans: when a rule is defined that activates on mail sent directly to an individual, mail that the individual receives by being on the Bcc line will not activate the rule. This also applies when the "Sent directly to me" and/or "Copied(Cc) to me" boxes are checked.

158.Example: John Doe has a Inbox Assistant rule which looks like:

CONDITION
TO: John Doe; Sent directly to me; Copied (Cc) to me
ACTIONS
MOVE TO: My Mail

Case #1: If John receives a message that was sent directly to him or he received it by being on the Cc line, the message will be moved.

Case #2: If John receives a message by being on the Bcc line, the message will not be moved.

159. If two Microsoft Exchange Inbox Assistant rules move a single message to two different folders, the incorrect message may get deleted. This happens when only one of the rules has an Alert action chosen to notify the user.
How can you fix this?

Ans:This happens when two rules exist that move a message to different folders and the first rule includes an alert action. If you read and delete the message from within the alert box, the message will be deleted from the folder that the second rule copied it to. To avoid this, change the order of the rules so the rule that includes the alert action is at the end of the list.

160. How can you generate an Offline Address Book that contains all addresses in the GAL?

Ans: Double-click the DS Site Configuration in the Configuration container. Click on the Offline Address Book tab. Click on the Modify button. Click on the Global Address List. Click OK. Click on the Regenerate Offline Address Book Now button. The users will now need to download the new Offline Address Book.

161. When you send mail using a Microsoft Exchange client, you receive the following error message:
Your message did not reach some or all of the intended recipients.
Subject: Call me later
Sent: 4/13/95 8:20:15AM
The following recipient(s) could not be reached:
Mary on 4/13/95 8:20:30 AM
No transport provider was available for delivery to this recipient.
Why?
Ans: This error is caused by an invalid recipient address. It can
present itself when the address is an unrecognized or unsupported address
type. Delete the address from the PAB and then add the user back into the PAB
from the Global Address Book (GAL).

162. How can you connect two Exchange Servers in NON-Trusted Domains?
Ans: When a Microsoft Exchange Server Site Connector is installed between two non-trusting Microsoft Windows NT Domains, use the Override property page to specify the name of the remote domain and the name of the service account that the remote Exchange Server uses. This will avoid any permissions-related problems between the two Exchange message transfer agents (MTAs).

163. Why are the message find and filters not displaying messages that were blind carbon copied (Bcc'd) when you select Copied (Cc) To Me.
Ans:The message finder and filter do not treat Bcc'd messages in the same manner as Cc'd messages. Therefore, Bcc'd messages are not displayed during the message find or filter. While both messages are carbon copies, the
Bcc'd message does not have the Bcc'd user's name in the header--only the names of the sender, original recipient (the name on the To line), and Cc's appear. Since the Bcc'd recipient's name does not appear in the message, the Finder and Filter cannot display the message.

164. How do you grant Read-only permission to the item in your mailbox ?
Ans. : Give Reviewer Role to a delegate to your mailbox.

165. Users want to use remote mail on Win 95 and download message headers for new mail. How do you set this up?
Ans. : Off-line - Will use Remote Mail feature of Exchange Client. This feature enables the user to view the headers and sizes of messages before downloading them.

166.Ms Schedule+ is configured to synch every 15 minutes. You backup data on your client's computer on Monday. The user went on-line to add appointments on Tuesday. On Wednesday the computer crashes. You get a new computer and restore the data from Monday. You open Schedule + first time since crash and synchronize. What appointments will be on Schedule + ?
Ans. : When the user was on line on Tuesday the schedule was synchronized every 15 minutes and then at the time user logs off. So the User should see all the appointments.

167.Amy is able to send mail to other users on her Microsoft Exchange Server. But when she sends mail to Bob, a user on another Exchange Server in the site, Amy receives a NDR after 24 hours.
A. Bob is a member of a hidden distribution list.
B. The GALs on the two servers are not synchronized.
C. The IS is not functioning on Amy's server.
D. The MTA is not running on Bob's server.

168.The computer running Microsoft Exchange Server has been upgraded with additional RAM and a new hard disk. What should the administrator do to take advantage of these upgrades?
A. Run the Migration Wizard.
B. Run the Performance Optimizer.
C. Run Online Maintenance.
D. Run the Exchange Setup again

169.You will be installing Microsoft Exchange Server. The server will join an existing site. What information must you have before you proceed with this installation? (Choose two)
A. The password of the site service account. 
B. The name of the site.
C. The name of the Exchange organization.
D. The share point to the Exchange files on an existing server.
E. The name of an existing Exchange server computer in the site. 

170.What type of trust relationship must the two domains have in order for the Exchange servers to be able to use the site service account?
A. No trust relationship is needed.
B. The Users domain must trust the Resources domain.
C. The Resources domain must trust the Users domain.
D. There must be a two-way trust relationship.

171.What is the minimum you must do to make directory replication between your site and the other sites operational again?
A. Upgrade all the servers in the organization to version 5.0.
B. Upgrade your directory bridgehead servers to version 5.0.
C. Restart the DS component on the upgraded server.
D. Restart the DS component on your directory bridgehead servers.

172.Your company is using the Dynamic RAS Connector between two site. Frequent line errors are causing long delays between connection retries and costing your company increased connection costs.
Which of the following parameters of the Dynamic RAS Connector could you modify to decrease the time the connector waits before attempting another retry after an error?
A. Checkpoint size (K)
B. Disconnect (sec)
C. Open interval (sec)
D. Max open retries

173.Your Exchange organization is comprised of multiple sites connected over an unreliable WAN that experiences a high packet loss. To adjust to this situation, you decide to decrease the amount of redundant data that is sent over the WAN due to failed or interrupted connections. Which two actions relating to the properties of the MTA components could you modify to accomplish this goal?
A. Set a high recovery timeout.
B. Set a low recovery timeout.
C. Set a high checkpoint size value.
D. Set a checkpoint value of zero.
E. Set a low checkpoint size value that is greater than zero.

174.You plan to create three Exchange sites connected over a permanent IP WAN. You would like to schedule the connections between the sites. Which of the following connectors would you use?
A. Site Connector
B. X.400 Connector
C. Internet Mail Service
D. Site Connector with routers

175.Your Exchange site is connected to a foreign mail system. There is directory synchronization between the two environments. You have a small number of recipients that you do not want to be replicated to the foreign system.
What can you do to keep these recipients from being replicated to the foreign system?
A. Configure them as hidden objects.
B. Configure the trust level of the recipients you do not want replicated to be higher than the trust level of the directory replication connector.
C. You cannot prevent recipients from being replicated.
D. Mark the "Do not replicate" box for each recipient.
E. Create a separate recipients container and place those recipients in that container.

176.What can you do to allow your users to use host names in the mail addresses of outgoing mail?
A. Configure a HOSTS file on each client.
B. Configure a LMHOSTS file on each client.
C. Configure the POP3 service to forward mail to that host.
D. Configure your TCP/IP configuration to include the location of a DNS server.

177.Acme Inc. replaces its UNIX mail server with Microsoft Exchange Server, the Internet Mail Service, and the POP3 Service. When users connect to the new server with POP3 clients, they can retrieve their mail. But when these same POP3 clients try to send mail through the server to recipients on the Internet, they receive error messages. What is the most likely cause of the problem?
A. POP3 clients cannot send mail.
B. The POP3 clients are not configured for the Microsoft Windows NT Challenge/Response authentication.
C. The Internet Mail Service does not have an address space for POP3.
D. The Internet Mail Service is not configured to re-route incoming SMTP messages.

178.As part of your normal administrative duties you monitor the CPU utilization of a Microsoft Exchange Server computer. You begin to notice high utilization when messages are sent to large distribution lists.
What could you do to reduce the load on your server?
A. Designate another server as the expansion server.
B. Move recipients into more than one container.
C. Move recipients to different servers.
D. Remove the X.400 address space from each recipient.

179.You have created a distribution list for the Sales department. When users send messages configured with request read receipts to this distribution list, they only receive receipts from the list, not each member of the list.
What is the likely cause of this problem?
A. The distribution list is configured to report to the list owner.
B. The distribution list is hidden from the GAL.
C. The distribution list is configured to report to the message originator.
D. The group membership is hidden from the address book.

180.Your Exchange organization currently formats aliases with first initial followed with last name. Management decides that it now wants it to be last name followed with first initial. They want this new format to be applied to all current users and future users.
What must you do to meet this objective? (Choose two.)
A. Modify all existing users.
B. Disable AutoNaming.
C. Reset One-Off addressing.
D. Change alias name generation to be %Last %1First.

181.You want users to be able to send messages to a single mailbox designated for the Technical Support department. What must you do to allow each member of the Technical Support department to use that single mailbox?
A. Designate each member of that department as an owner of the mailbox.
B. Allow each member to "Send on Behalf Of" that mailbox.
C. Allow each member to "Send As" for that mailbox.
D. Create a distribution list and make it the owner of the mailbox.

182. You need to move 10 mailboxes from Server A to Server B within your site. Each mailbox contains five unique messages of 1 MB each. Each mailbox also contains five single-instance messages that were sent to all recipients in the site. After you move the mailboxes from Server A to Server B, how will the size of the Private Information Store on Server B change?
A. The Private Information Store will decrease.
B. The Private Information Store will stay the same size.
C. The Private Information Store will increase by 55 MB.
D. The Private Information Store will increase by 100 MB.

183.Your company has 40 users at the central office and 400 field engineers. The field engineers, using modems and HTML client software, connect to your Exchange server through a RAS server containing 30 modems. If you are using Per Seat licensing, how many total Client Access Licenses do you need?
A. 440
B. 400
C. 40*
D. 70

The clue to this answer is HTML. HTML means a browser and WWW which accesses IIS only and NOT Exchange. Therefore, only 40 licences are required.

185.You are the administrator of a Novell NetWare network. The network is using only IPX. You have installed Microsoft Exchange Server as your messaging server. You want to allow users to perform their own over-the-network installation of Microsoft Outlook. What must you do to allow the clients to perform the over-the-network installation of Microsoft Outlook and to connect to the Exchange server? (Choose all that apply.)
A. Install TCP/IP on all clients.
B. Configure the NWLink IPX/SPX Compatible Transport protocol on the Exchange server.
C. Configure the SAP Agent on the Exchange server.
D. Copy the Microsoft Outlook files to a network share point and give the users Read permission at that directory. *

186.You use Microsoft Outlook and Dial-Up Networking to access your mailbox on a Microsoft Exchange server. You decide that you do not want to download messages of over 20 KB, and that you do not want to examine the size of every message before downloading it. What should you do to enable this?
A. Create a rule in your Inbox Assistant that only messages smaller than 20 KB should be downloaded.
B. Create a rule in the Out of Office Assistant that only messages smaller than 20 KB should be downloaded.
C. Configure a view based on size and only download messages in that view.
D. Configure remote mail to use an advanced filter that only downloads messages smaller than 20 KB.

187.Brad has a laptop computer configured with an .OST file. Brad periodically synchronizes his laptop with the server. Brad decides he wants to be able to access a particular public folder while he is works offline. When he examines the properties of that public folder in order to synchronize it with his laptop, he does not see the Synchronization tab. What must be done to enable the synchronizing of a local copy of a public folder with the original on the server?
A. Designate the public folder as a Favorite.
B. The administrator must configure the public folder for synchronization.
C. The owner of the public folder must configure it for synchronization.
D. Public folders cannot be synchronized, only Inboxes.

188.You have an Employee Benefits public folder that you place possible new benefits plans. Employees can read and post their comments about those plans. Because of the large number of replies it becomes hard for people to find the original information in the folder. What could you do so that all replies are automatically sent to a subfolder called Discussion?
A. Make the Discussion folder a Cc: recipient every time someone posts a reply.
B. Designate the Discussion folder a follow-up recipient to the Employee Benefits folder.
C. Configure the Employee Benefits folder to forward all messages to the Discussion folder.
D. Add a rule to the Employee Benefits folder that all replies should go to the Discussion folder.

189.You have a Key Management Server configured in your organization. Currently you are using the CAST-40 encryption protocol. Management decides they want to use CAST-64. What must you do for this change to become effective for your organization? (Choose two answers.)
A. Reinstall the Key Management Server.
B. Stop and start the SA.
C. Change the preferred encryption protocol in the Encryption object in the hierarchy.
D. Modify each users' messaging profile through Control Panel.
E. Perform a recovery of the keys for every security-enabled client.

190.You are the administrator of advanced security for the Exchange environment. A user named Pete requests that he be configured for advanced security in order for him to send encrypted messages. What must you do to enable advanced security for Pete? (Choose all that apply.)
A. Instruct Pete on how to do person-to-person key exchange.
B. Instruct Pete on how to register for advanced security.
C. Provide a security token to Pete and instruct him how to enter it into his client profile.
D. Have Pete reinstall his client software and this time choose advanced security.
E. Enable advanced security on Pete's mailbox.

191.You allow anonymous Internet clients with LDAP support to access you Exchange Directory. You notice that several attribute fields are visible to these clients. You would like to prevent these clients from viewing these attributes. How could you do this?
A. Remove those attributes from each recipient.
B. Clear those fields in the attributes of the DS Site Configuration object.
C. Configure the trust level of those attributes to be lower than the DS and LDAP.
D. Set LDAP to allow only initial substring searches.

192.You have configured your Exchange server to reject connections from IP addresses between the range 202.55.57.128 to 202.55.57.255. You verify that POP3, NNTP, and LDAP clients with addresses in that range cannot access your server. But you find out that Web clients with addresses within that range can access your server.

193.What additional step must you take to prevent Web clients with those addresses from accessing your server?
A. Exclude that range from your DHCP configuration.
B. Use Internet Service Manager to reject that range of addresses.
C. Disable the guest account in User Manager for Domains.
D. Use WINS to disable those addresses.

194.Your Exchange server is connected to the Internet and is configured for Web client access. You would like to make the contents of a certain public folder available to Web clients outside your company. What permission do you have to assign to accomplish this?
A. Grant Read permission to the Guest account.
B. Grant Folder Visible permission to the Guest account.
C. Grant Read permission to the anonymous user.
D. Grant Folder Visible permission to the Guest account.

195.You upgrade one of your Microsoft Exchange Servers from version 4.0 to 5.0. The remaining servers are still at version 4.0 After the upgrade, users who have mailboxes on the 5.0 server report that they cannot use their POP3 clients to access their mailboxes. What is the most likely cause of this problem?
A. The site service account does not have the right to "log on as part of the operating system.
B. Sites with both 4.0 and 5.0 Exchange versions do not support POP3.
C. The TCP/IP protocol must also be upgraded.
D. Microsoft Windows NT Challenge/Response authentication is not enabled.

196.Some of the employees of your organization use POP3 programs when they are out of the office to access their Exchange mailboxes. When those employees are at the office, they use Microsoft Outlook to access their mailboxes. With Microsoft Outlook, they can see all their messages, whether they be in their Inbox or any of its subfolders. But with their POP3 programs, they cannot see all their messages. What is preventing these employees from seeing all their messages through their POP3 programs?
A. The unviewable messages contain OLE attachments.
B. The unviewable messages are in subfolders of the Inbox.
C. The unviewable messages are greater than 1.2 MB in size.
D. The unviewable messages contain shortcuts to network shared directories.

197.You want to be able to view Exchange recipients by the building their users are in. Each recipient already has a custom attribute stating the building name. You want this view to be available in both the Exchange Administrator program and in Exchange client applications. What must you do to accomplish this?
A. Create Personal Address Books for each user.
B. Modify Auto Naming.
C. Create new recipient containers.
D. Create views under the Address Book Views container and make them available to clients.

Back Home                                                                                                                                         Want More?